Solids Processing, Injection & Control - Cuttings Management | Schlumberger-巴黎人会员登录

Solids Control and Cuttings Management

Equipment and services to maintain drilling fluid integrity and minimize waste

pan installation of SCREEN PULSE

Our solids control technologies optimize drilling efficiencies by maintaining fluid integrity, reducing fluid losses, minimizing HSE impact, and lowering drilling costs through NPT management. Offerings include advanced shale shakers and associated OEM composite screens, new-generation centrifuges and pumps, cuttings dryers, and the RHE-USE two-stage centrifuge system enabling reuse of invert emulsion drilling fluids over multiple wells.

We work closely with rig designers, contractors, operators, and shipyards to customize integrated drilling and waste management configurations for optimal fluid recovery, reduced dilution rates, less waste generation, and lower costs.

Containment and cuttings minimization

New-generation cuttings management technologies reduce the HSE footprint of drilling operations. They include fully enclosed pneumatic technologies for the containment, handling, temporary storage, and transport of drill cuttings. Thermal and frictional desorption minimize the fluid content of cuttings, significantly reducing total waste volumes and the need for costly transportation. We also have significant expertise in planning, implementing, and monitoring in situ injection of drilling waste. Operators save time, labor, rig space, and mitigate HSE risk by avoiding transportation over water or on roadways.

Buy Direct: Solids Control Equipment
Screens, plugs, and other shaker equipment are available on The Oilfield Marketplace.
Browse Solids Control

Solids Control

Shakers

M-I SWACO technology

Consistently high-quality solids control performance—on land or offshore.

Mud Cleaners

Solids removal and fluid preservation

Remove dry solids from the entire circulating volume while retaining premium base fluid.

Shaker Screens

Exclusive line

Reduce costs and waste volumes on shakers from M-I SWACO or third parties.

Centrifuges

High-volume, high-speed units

Enhance environmental performance.

RHE-USE

Two-stage centrifuge system

Remove low-gravity solids and produce clean fluid for reuse in drilling systems.

Cuttings Management

CLEANCUT

Cuttings collection and transportation system

Comply with environmental regulations by safely and efficiently collecting and containing drill cuttings.

iWISE

Integrated waste injection services

Meet or exceed stringent environmental standards in remote and environmentally sensitive locations.

VERTI-G

Cuttings dryer

Maximizes liquid-solid separation in large-volume processing.

SCREEN PULSE

Fluid and cuttings separator

Combine pulsating technology with ultraefficient screens for the utmost in cuttings treatment and fluid recovery.

Fluids Processing

ATC

Automatic tank-cleaning technology

Minimize HSE risks, waste generation, and emissions.

ENVIROUNIT

Offshore slop water treatment system

Reduce offshore drilling waste stream by up to 90%, reduce trips to shore, lower emissions and fuel use.

PRESSURE & FLUID MANAGEMENT SYSTEM

Coiled tubing application technology

Precisely control pressure in coiled tubing, drilling, completions, or any other critical operation.

Filtration Products, Equipment, and Services

Technologies to remove suspended solids from fluids

Protect your well and completion with optimized filtration solutions.

View All

Share This